On the RTX 5070 Ti the Coder quantisation stays inside the 16 GB VRAM limit, so the whole model loads without spilling into system memory. You can watch the read and write throughput reported by Stratat: roughly 2498.5 reads per second and 71.1 writes per second, which means interactive prompts feel immediate for single‑user work.
Why Coder and what it changes
Coder reduces the number of bits used for the majority of the weights while keeping quality high enough for practical local use. That weight reduction directly lowers the VRAM footprint, letting a 16 GB card hold a full model that would otherwise need more than 20 GB on a larger card. On the RTX 5070 Ti the reduced precision also trims power draw, keeping the board near its 450 W ceiling without throttling.
How to measure on your own machine
Run Stratat’s built‑in telemetry on a fresh install, then note the read TPS (2498.5) and write TPS (71.1) numbers shown in the dashboard. Check the VRAM usage graph; if it stays under 16 GB you have a good fit. Power readings around 450 W are typical for this card under load; compare to idle power to confirm the inference profile is stable.
| Metric | Value | Note |
|---|---|---|
| VRAM usage | 16 GB | Fits exactly the 16 GB capacity |
| readingTps | 2498.5 | Reads per second measured by Stratat |
| writingTps | 71.1 | Writes per second measured by Stratat |
Define Coder as a quantisation method that applies mixed‑precision reductions to a model's weights, keeping the computational graph unchanged while shrinking the amount of data moved.
Practical tips
Keep the driver up to date and use the latest Stratat build to ensure the optimisation path for the Coder format works correctly. Avoid overclocking beyond 450 W; the 5070 Ti is designed for that power envelope during inference.
Measured results summary
All observed metrics come from a single RTX 5070 Ti running the same software stack. No other hardware or model variant was tested, so figures are specific to this configuration.