The RTX 4070 Ti SUPER provides a highly capable environment for running the iq3-s quantization, delivering a balanced blend of speed and memory efficiency. With 16GB of VRAM, the system achieves a Good fit, ensuring that the model loads and runs without requiring offloading to system RAM, which would otherwise drastically reduce performance. Users can expect robust reading speeds of 1700 tokens per second, making this configuration suitable for interactive chat applications where latency matters.
Understanding the Hardware Fit
The primary constraint for local LLMs is often VRAM. The RTX 4070 Ti SUPER offers 16GB, which is the critical threshold for fitting many mid-sized models with iq3-s quantization. This fit is classified as Good, meaning the entire model resides in fast GPU memory. If the fit were Poor, the system would spill data into system RAM, slowing down inference significantly. By keeping everything on the GPU, you maintain the high reading throughput observed in testing.
Measuring Your Own Performance
To verify these results on your own machine, you should monitor the GPU utilization and memory usage during inference. Use tools like `nvidia-smi` or the Strata client interface to observe the reading speed. If your reading TPS drops below 1000, check if the model is partially offloaded. The power draw of 435W indicates the GPU is working hard to process these tokens, which is expected for high-performance local inference.
Performance Data
The following table summarizes the key metrics observed during stable operation of this specific configuration:
| Metric | Value | Context |
|---|---|---|
| VRAM | 16 GB | Total available memory on the RTX 4070 Ti SUPER |
| Reading Speed | 1700 TPS | Tokens processed per second for text generation |
| Writing Speed | 72 TPS | Tokens written to disk or saved state per second |
| Power Draw | 435 W | Peak power consumption during active inference |
Cost of Inference
Running this setup consumes significant power. At 435W, the cost to run the GPU for one hour is approximately $0.07 at the US average electricity rate of $0.17/kWh. While this is not free, it is far cheaper than API calls for high-volume usage. The iq3-s quantization allows you to fit the model without excessive overhead, maximizing the value of your hardware investment.
Defining the Quantization
The iq3-s quantization is a specific compression technique that reduces the model size by approximately 50% while retaining most of its logical accuracy, striking a balance between speed and intelligence.