The RTX 3090 provides a Good fit for running the coder quantization locally, balancing substantial VRAM capacity with manageable power draw. While inference speed is adequate for interactive use, the 500W power draw is a significant operational cost you must account for when calculating your total cost of ownership.

Understanding the Hardware Fit

The RTX 3090 features 24GB of VRAM, which allows it to load the coder quantization without excessive offloading to system RAM. This configuration is labeled as a Good fit, meaning the model runs entirely in GPU memory, which is critical for maintaining consistent performance. You can verify this on your own machine by monitoring the GPU memory usage in your system task manager or via command-line tools like `nvidia-smi`. If the VRAM usage spikes significantly above the 24GB limit, the system will begin swapping, causing severe latency that degrades the user experience.

Analyzing Throughput and Power

The measured reading throughput is 2094 tokens per second, which is excellent for context loading and prompt processing. However, the writing throughput is 86.5 tokens per second, which is sufficient for coding assistance but requires patience for long-form generation. The system draws 500 watts under this load. To understand the financial impact, calculate the cost per hour using your local electricity rate. At $0.17 per kWh, running this setup for an hour costs approximately $0.085. While this seems small, long training or continuous inference sessions will accumulate noticeable costs. You can measure your own power draw using hardware monitoring software to see if your specific GPU variant matches this 500W baseline.

Practical Considerations for Users

When running the Strata engine locally, ensure your cooling solution can handle the 500W thermal output. The RTX 3090 is known for high power consumption, and inadequate airflow will lead to thermal throttling, reducing the token throughput below the measured 2094 reading TPS. Always check your GPU temperatures during sustained loads to ensure stability.

MetricValueSignificance
VRAM24 GBEnsures the model fits in memory for fast access
Reading TPS2094High speed for processing large context windows
Writing TPS86.5Adequate for interactive coding assistance
Power500 WHigh energy cost requiring efficient cooling

A quantization is a technique that reduces the precision of the model's weights to decrease memory usage and increase inference speed, often with a minimal impact on output quality.

Cost Calculation

To calculate your specific electricity cost, multiply the power draw in kilowatts (0.5 kW) by your hours of use and your local rate ($0.17/kWh). This helps you decide if the convenience of local inference outweighs the energy expenses compared to cloud-based alternatives.