For users running the Strata engine on Stratat, a single RTX 3090 with 24GB VRAM is the practical limit for most large language models, while using two RTX 3090s doubles your VRAM to 48GB but introduces complex PCIe bandwidth limitations and higher power costs. The choice depends entirely on whether your specific model fits within 24GB; if it does, a single card offers superior performance per dollar and lower electricity usage at $0.17 per kWh. If the model requires more than 24GB, dual cards allow larger context windows but require careful configuration to avoid PCIe bottlenecks.

Understanding VRAM Constraints

The primary constraint in local inference is Video RAM (VRAM), not just raw compute power. The RTX 3090 provides 24GB of GDDR6X memory, which is sufficient for 70B parameter models only when heavily quantized to 4-bit or 8-bit precision. When you attempt to run a model that exceeds this memory capacity, the system will either fail to load or drastically slow down by offloading layers to your system RAM, which is significantly slower than GPU memory. This is why the 24GB figure is the critical threshold for the single card configuration.

The Dual Card Complexity

Using two RTX 3090s theoretically provides 48GB of VRAM, allowing for larger models or less aggressive quantization. However, the Stratat client must manage data distribution across two GPUs. This process relies on the PCIe bus, which can become a bottleneck. If the PCIe bandwidth is insufficient, the overhead of moving data between the two GPUs can negate the benefits of having more memory. You must verify that your motherboard and CPU support PCIe 4.0 x16 or higher to ensure that the dual setup does not suffer from data transfer delays.

Cost and Efficiency Analysis

Running two GPUs doubles your power consumption. With electricity priced at $0.17 per kWh, the operational cost of a dual RTX 3090 setup is significantly higher than a single card. For users who only need to run models that fit in 24GB, the dual setup is an inefficient use of resources and money. The single RTX 3090 remains the most cost-effective solution for the majority of local AI tasks on Stratat.

SpecificationSingle RTX 3090Dual RTX 3090 Setup
Total VRAM24 GB48 GB
Power ConsumptionHigh (approx. 350W+ under load)Very High (approx. 700W+ under load)
PCIe Bandwidth ImpactMinimal (Single x16 lane)High (Risk of bottleneck on shared bus)
Cost EfficiencyOptimal for <24GB modelsNecessary only for >24GB requirements

The core term VRAM refers to the dedicated high-speed memory on the graphics card used to store model weights and activations during inference, directly limiting the size of the AI model you can run locally.